Difference between revisions of "Map Editor"

From FA Forever Wiki
Jump to navigation Jump to search
m (→‎Placing resources: making it bit more clear)
Line 357: Line 357:
Now that the map is technically playable and has some visual appeal, it’s time to place some resources. A little care must be taken to ensure that the mass locations are fairly distributed. A commander should be able to build the four first mass extractors in the same amount of time from both sides of the map. If mass deposits are close enough to allow doubleadjacency, the same adjacency bonuses should be available to both sides. Mass deposits farther away should be the same distance from the starting location. For reference, a factory is 9 grid units wide and tall; power generators are 2.25 wide and tall. The commander build range is 10.
Now that the map is technically playable and has some visual appeal, it’s time to place some resources. A little care must be taken to ensure that the mass locations are fairly distributed. A commander should be able to build the four first mass extractors in the same amount of time from both sides of the map. If mass deposits are close enough to allow doubleadjacency, the same adjacency bonuses should be available to both sides. Mass deposits farther away should be the same distance from the starting location. For reference, a factory is 9 grid units wide and tall; power generators are 2.25 wide and tall. The commander build range is 10.
* '''How to make symmetric mass points.'''
* '''How to make symmetric mass points.'''
** Markers can't be rotated or copy pasted, that's why we're going to use props to get mirrored positions.
# Place resources on one half of the map
# Place resources on one half of the map
# Place some props on same position (rocks for example)
# Place some props on same position (rocks for example)
Line 362: Line 363:
# Go to '''Prop Edit''' window (picture below)  
# Go to '''Prop Edit''' window (picture below)  
# Check '''Rotare about map center''' box, set 180 Yaw and click on '''Set''' button
# Check '''Rotare about map center''' box, set 180 Yaw and click on '''Set''' button
# Place resources on the other side of map and then don'd forget to delete props under them!
# Place resource markers on the other side of map and then don'd forget to delete props under them!
Placing resources is short and easy. Go back to the Markers layer in the Layer window. Drag a Mass marker and position it. Repeat for every mass deposit you want on the map. Hydrocarbon locations can be placed with the Hydrocarbon marker.  
Placing resources is short and easy. Go back to the Markers layer in the Layer window. Drag a Mass marker and position it. Repeat for every mass deposit you want on the map. Hydrocarbon locations can be placed with the Hydrocarbon marker.  

Revision as of 10:12, 2 June 2015


Editor splash.png

Welcome! This guide will take you step-by-step through the creation of maps for Forged Alliance Foverer, shown on a small 1v1 map entitled Summer Duel. Before you continue reading, please ensure you have all the necessary tools and everything set up: Map Editing Tools

If you’ve already taken a look at the Supreme Commander map editor, you’re probably a little confused. At first glance it doesn’t seem like there is a whole lot there. You’ve also probably noticed that there isn’t quite as much polish as Supreme Commander itself. This is because the tool was first built for internal use. Don’t let that get you down! This is the same editor that GPG uses at their studio. We are very lucky to have access to it. Everything you need to create rich maps like the ones that shipped with the game can be found in the editor, once you get used to it.

A word of caution: a good map takes many, many hours to complete. A lot more goes into maps than throwing up a heightmap and slapping down some textures. Doing those things is easy enough, but doing them in an interesting and gameplay promoting way is very difficult. If you have the patience, however, playing on a map you designed yourself can be a rewarding experience.

  • Video Tutorials.png Alternative tutorial for creating map by blaxxun here, with using external programs for creating heightmap and texture masks.

Source of inspiration

You can open any map created by others and most original maps. Only maps that can't be opened with editor are campaign maps and Forged Alliance multiplayer maps (X1MP)

Original Maps
Folder Name Map Name
SCMP_001 Burial Mounds
SCMP_002 Concord Lake
SCMP_003 Drake's Ravine
SCMP_004 Emerald Crater
SCMP_005 Gentleman's Reef
SCMP_006 Ian's Cross
SCMP_007 Open Palms
SCMP_008 Seraphim Glaciers
SCMP_009 Setons Clutch
SCMP_010 Sung Island
SCMP_011 The Great Void
SCMP_012 Theta Passage
SCMP_013 Winter Duel
SCMP_014 The Bermuda Locket
SCMP_015 Fields of Isis
SCMP_016 Canis River
SCMP_017 Sytris Major
SCMP_018 Sentry Point
SCMP_019 Finn's Revenge
SCMP_020 Roanoke Abyss
SCMP_021 Alpha 7 Quarantine
SCMP_022 Artic Refuge
SCMP_023 Varga Pass
SCMP_024 Crossfire Canal
SCMP_025 Saltrock Colony
SCMP_026 Vya-3 Protectorate
SCMP_027 The Scar
SCMP_028 Hanna Oasis
SCMP_029 Betrayal Ocean
SCMP_030 Frostmill Ruins
SCMP_031 Four-Leaf Clover
SCMP_032 The Wilderness
SCMP_034 High Noon
SCMP_035 Paradise
SCMP_036 Blasted Rock
SCMP_037 Sludge
SCMP_038 Ambush Pass
SCMP_039 Four-Corners
SCMP_040 The Ditch
X1MP_001 Crag Dunes
X1MP_002 Williamson's Bridge
X1MP_003 Snoey Triangle
X1MP_004 Haven Reef
X1MP_005 The Dark Heart
X1MP_006 Daroza's Sanctuary
X1MP_007 Strip Mine
X1MP_008 Thawing Glacier
X1MP_009 Liberiam Battles
X1MP_010 Shards
X1MP_011 Shuriken Island
X1MP_012 Debris
X1MP_014 Flooded Strip Mine
X1MP_017 Eye of the Storm

Create a new map

Go ahead and start the map editor. You will be greeted by a familiar splash screen. The editor integrates directly with the game engine, and it puts it to some pretty cool uses. The splash screen will disappear to a black window once loading is complete. If the window starts out maximized, double click on the top blue bar to resize it down. (When maximized, the editor simply stretches the image over the screen. This can confuse you when you try clicking around or zooming in and out, so it’s easiest to just use the default size.)

  • Size of the main window can be changed in this file:
C:\Users\<USERNAME>\AppData\Local\Gas Powered Games\SupremeCommander\Editor.prefs
  • Edit height and width in Main to your values.
  • If your editor start everytime maximized, change maximized value from true to false
   Windows = {
       Main = {
           y = 5,
           x = 10,
           height = 800,
           maximized = false,
           width = 600

Under the File menu, select New map icon.PNG New. A dialog box will appear.

New map.png

The options are mostly self-explanatory, but just to be clear:

Map sizes
km Game Units
5x5 256x256
10x10 512x512
20x20 1024x1024
40x40 2048x2048
80x80 4096x4096
  • Name: The name of your map. The directory your map is saved to will be the same as this.
  • Description: A short description of your map. This is the same description you see when browsing the maps before hosting a game.
    • Both Name and Description can be changed later in Edit - Scenario... or in MAPNAME_scenario.lua file located in your map folder.
  • Use existing map: You can create a new map based off of another map. For instance, if you wanted to modify Sentry Point to remove the civilians, you could fill in the Map File field with the path to Sentry Point. This is effectively the same as opening a map and saving it with a different name.
  • Create new map: Starts a new, completely blank map. Selecting this will allow you to check and uncheck the Water field.
  • Width/Height: Size of the map in game units. A 5x5 km map is 256x256 game units wide.
    • You don't need to make square maps. Either select different Width/Height here, or later you can set playable area so map is cut.(Example Winter Duel)
  • Initial Elev.: How high the default terrain is. A good number is usually 64. Very low or very high initial elevations may cause problems later on when you are editing your heightmap.
  • Water: Enables or disables water.
  • Water Elev./Deep Elev./Abyss Elev.: The threshold values for rendering water. If the heightmap is below these values, the appropriate type of water will be rendered. It is important to keep these in mind if you are designing a map with water. (These values can be changed later in Water Layer - Properties icon.PNG Edit Water Properties)

Name your map whatever you would like. This guide will refer to it as Summer Duel, since we’re going to make a map similar to Winter Duel. You can leave the Description field blank if you’d like. Check the Create new map box. If you want to use water, keep the Water box checked; otherwise, uncheck it. Keep the map size at 256x256 and the initial elevation at 64. Click the Create button.

Coordinates editor.PNG

A new map will be created and displayed. Click the save button on the toolbar or go to File > Save. Saving your work is never a bad thing. You should do it as often as possible. The map editor is stable, but there are certain elements beyond your control. The last thing you want is for your power to flicker and erase three hours of hard work! Take a moment and get accustomed to the feel of the editor. Zooming works the same as in Supreme Commander. You can scroll with Middle Mouse Click + Drag and rotate with Alt + Middle Mouse Click + Drag. The current world coordinates of the mouse cursor are displayed in the lower right of the window.

Map Location

Map Editor sees only maps located in this folder. If you want to edit already done map, copy it there.

C:\Program Files (x86)\THQ\Gas Powered Games\Supreme Commander\maps
  • Sometimes editor can't do changes in Program Files folder and therefore saves your map in this folder. That can be fixed by launching editor as administrator.
C:\Users\<UserName>\AppData\Local\VirtualStore\Program Files (x86)\THQ\Gas Powered Games\Supreme Commander\maps

Working Map Preview

Map Vault automatically generates preview images for you, if you wish to have a working preview, there are two key things you must do.

  • Do NOT host your map online, under the name you will upload it with, without it being in the vault (this will cause everyone online to generate a non working preview and hence when the map is uploaded to the vault, they will have no preview image for that map when it is hosted).
  • Delete any preview images in the folder before uploading. (this will ensure the preview is accurate and not of a previous version of the map).

Heightmap editing

Go to the View menu and ensure that Layers and Tool are checked. If not, check them now. Select the Elevation layer at the bottom of the Layers window:

Layers window.png

The Tool window should change if Elevation was not previously selected. It should look like this:

Elevation window.png

  • If you dont have any brushes in this window go to Map Editing Tools and get editor.scd file that contains default brushes.
  • New Custom Brushes for Map Editor

At the top is choice of all available terrain brushes. The terrain will be raised up or down in the same shape as the brush. Blue means the terrain will be raised, red means the terrain will be lowered. The other options are:

  • Strength: How much your brush changes at a time.
  • Size: How large the brush is in world units.
  • Maximum: The maximum height allowed by the brush. If you are raising the terrain, a plateau will form at the height you specify here. Using a brush on terrain with a higher elevation than Maximum will cause the terrain to be lowered to Maximum.
  • Minimum: The minimum height allowed by the brush. It functions the same as Maximum, except that it acts as a lower boundary.

Before you set out to shape the map, it is very helpful to have an idea of what the final map should look like. As mentioned previously, this guide will create a map similar to Winter Duel. Go ahead and open up Winter Duel through File > Open. It can be found in the SCMP_013 directory. If the editor gives you a black screen, simply restart the program. If you encounter this problem frequently, you can start multiple instances of the map editor to switch between maps. Zoom around and pan the camera to get a feel for the landscape.

You should notice that the map is slightly bowl shaped. The terrain begins level where the players start, and gradually slopes downward into a small valley below. This is the first feature we are going to replicate. Smooth slopes such as this are set up by first creating a stairstep pattern. Select the round1k brush from the Elevation Brush window. Set the Maximum field to 65 (remember: our initial elevation is 64, so this will create a step 1 unit high). Draw a line down the center of the map, slightly off to the left. Now set the Maximum field to 66 and repeat, placing a line slightly to the left of the first step. Repeat this all the way to the left edge of the map. The result should look similar to this:


How closely together you space your steps will determine how steep the slope is. The leftmost side of this image has a height of 73; the center has a height of 64. When designing the rest of the map, we need to keep in mind that the final product will be rotationally symmetrical. Although this takes some of the feel and personality away from the map, it does guarantee an even playing field, and that is an important consideration. Additionally, it will make texture and decal placement much easier, as we will see later. Since the map will be symmetrical, we only have to work on the left side of the map. Changes on smooth terrain can be tricky, so we will keep the slope as a stair-step for now. Next we will add a cliff face protruding into the middle, similar to what Winter Duel has:


As you design cliffs, you will want to make sure you are actually creating cliffs. Go to View > Debug and click Slope. (Hotkey: O) Green indicates that land is flat enough to construct buildings on. Red indicates that land is too steep for units to traverse. Colorless means that units can traverse that land, but it is too steep to build on.

What next? Maps on Winter Duel frequently break into short stalemates in the center with massive defenses on opposing cliffs. Let’s add another cliff above the first to spice things up a bit. This cliff will shadow the one we just added, such that if an opponent can gain hold of it, they will gain a tactical stronghold against the enemy’s defenses. Terrain height is an important consideration when designing cliffs. A height difference of 2 is not passable by units, but such a low cliff is difficult to work with. Cliffs should typically be at least 4 units high. After some tinkering, the result should look similar to this:


The next logical step is to do something with the lower left of the map. However, without visualizing the lower right, it’s difficult to make a good call. This is where Photoshop comes in. With the Elevation tool selected, click the property button Properties icon.PNG on the top toolbar. Next click on Export Heightmap where your brush choices used to be. Save the .raw file in your map’s directory with a distinct name.

  • Note that the editor will not prompt you if you try to overwrite an existing file.

Editing the heightmap in photoshop

Open up Photoshop (or Paint Shop Pro) and load your .raw file. Important: .raw files do not contain any sort of default header information. It is up to you to supply the image properties. In our case the dimensions are one greater than the world dimensions. If this is not Photoshop’s guess, put in 257x257 as the image size. Make sure the image is loaded as a 16-bit, single channel image. The byte order is IBM PC. The dialog box should look similar to the following:

Photoshop raw.jpg

Select the left half of the image using the marquee tool. An easy way to get exactly half is to choose Style: Fixed Size at the top toolbar. Set Height to 257 and Width to 127 or 128. With these properties set, click on the image. Click inside the selection box and drag it to the left of the image. The selection should snap to the edges. Press Ctrl + C to copy the selection, and then press Ctrl + V to paste it. Press Ctrl + A to select the entire image, and then press Ctrl + T to open up the transformation controls. At the top toolbar, set the rotation angle to 180.0° and press Enter. You should now see a rotationally symmetrical image. If the rotated image did not move over to the right, select the arrow tool and move it there manually. Go to Layer > Flatten Image, then save the image as a .raw file in your map directory. Make sure the byte order is set to IBM PC!

Before importing heightmap back to editor, save your map in case something goes wrong, maybe even make a copy of your map folder. Back in the Supreme Commander map editor, click on Import Heightmap. Load in the heightmap you just saved from Photoshop. Be careful with this feature, because it is not undoable. You should see the following:


The next step is to complete upper cliff we started. Do so on the bottom half so that it gets mirrored to the top next time we go through the Photoshop process. To get back to the brushes, click on the brush icon Brush icon.PNG at the top toolbar or press B. After that, feel free to improvise a little. Experiment with the different brushes and settings to make something interesting, and keep in mind that your map needs to be fun to play. Focus your efforts on the left hand side of the map. When you are all finished, repeat the Photoshop mirroring procedure and load the new heightmap. Hopefully it will look something like this:


Things are shaping up nicely! Now that the basic outline of the map is established, we can smooth it out a bit. With the Elevation layer selected, click the blur icon Blur icon.PNG at the top toolbar. You’ll notice a selection of four blur brushes. Blur128 and Unsharp128 are good general purpose blurring tools, while unsharp128_hard is great at getting into close areas. Select unsharp128_hard. Go through the stair-steps on the left-hand side of the map and blur them into a single smooth slope. Next, add some ramps to your cliffs by blurring the edges. Once again, repeat the Photoshop mirroring process and load the new heightmap. This is what the map looks like now:


Blur window.PNG

We’re almost there! There are two things left to fix. The first is that there is a noticeable seam down the middle of the map. This is easily fixed by with the blur tool. Whether or not you use Photoshop to make the map perfectly symmetrical again is up to you. The second problem is a trickier one. If you zoom in on one of the cliffs, you’ll notice that it doesn’t look quite right. It has a noticeably jagged edge, and triangles are either missing or protruding out into the ground below. To fix this, go to the blur tool within the Elevation layer. Select blur128 as your brush. At the bottom you’ll notice a dropdown box. Choose the Impulse option. With a size that slightly extends to either side of the cliff face, run the brush along your cliffs. You can make them look much better with a bit of massaging.


Congratulations, you’ve just completed your first heightmap! The cliffs in this case are not perfect and do show some popping. If you feel particularly ambitious, you can go through and add some small height variations to the map. Flat terrain is convenient for gameplay, but it looks rather dull and a little slope can dramatically improve the look of a map.

Making it playable

Once you have your map set out properly it's always a good idea to try it out and check that the scale is right. To start up a game you need to do the following (assuming you already have the tool window open):

Create start markers

Editor marker.jpg

First we create two markers which serve as the starting points where the ACU's will gate in.

  1. Open to the Markers Layer (or just press F6)
  2. Create two blank markers by dragging the "blank marker" icon out onto your map (they should appear in the markers tool window as "Blank Marker 00" and "Blank Marker 01")
  3. Rename "Blank Marker 00" to "ARMY_1" and "Blank Marker 01" to "ARMY_2" (by clicking on them twice slowly)
  • If you double click marker editor will zoom in to that marker so you can see which one you are renaming.
  • This is important while making team game map to make sure Even vs Odd Auto-teams will work correctly.

Create armies

Games layer.png

Next we create armies. Defining an army is important for the game scripts, everything a player can control belongs to a specific army. So for a 2 player map, we need 2 armies.

  1. Open the armies layer (or just press F2)
  2. Create two armies (click the leftmost new army button)
  3. Open the games layer (or just press F1)
  4. Click on "add a configuration" and rename the configuration to "standard" (by clicking on it twice slowly)
  5. Click on "add a team"
  6. Drag the two armies ("ARMY_1" and "ARMY_2") into the teams box

What we want to do next is rename the team to FFA, however the editor doesn't work very well here so we have to do it manually:

  • Save your work and close the editor
  • Go to your "\Supreme Commander\Map\YourMapName" folder
  • Open the YourMapName_scenario.lua file with a text editor
  • Add the new parts to this file
  Configurations = {
      ['standard'] = {
          teams = {
              { name = 'New Team 1', armies = {'ARMY_2','ARMY_1',} },
          customprops = {
  • Change the "New Team 1" bit to "FFA" so that it looks like this:
  Configurations = {
      ['standard'] = {
          teams = {
              { name = 'FFA', armies = {'ARMY_2','ARMY_1',} },
          customprops = {
  • Save the YourMapName_scenario.lua file, now the map is playable.
    • If you want to have working map preview, don't host your map online until its done!

Adding a startup script

We also need to add a lua script file to get the game running:

  • Create a file called "YourMapName_script.lua" in the same folder
  • Copy and paste the following in (a detailed explanation is in the scripts section)
  local ScenarioUtils = import('/lua/sim/ScenarioUtilities.lua')
  function OnPopulate()
  function OnStart(self)

Finished! You should now see the map in the Supreme commander maps list and you should be able to play it! Please try to do so and if you can, you can skip ahead to the next part. If not, have a look at Further changes to the scenario file. This should help you out (although it's a bit extensive, so just ignore it if you can actually play the map).


Summer Duel is awfully bland right now, and it doesn’t represent summer in the least. We need to add textures to the ground to give it some flavor. We will focus on the left hand side of the map just like before. Once that is complete, the right hand side will be created by rotating the textures in Photoshop. Texturing the map is relatively straightforward. Textures are placed in different layers called strata. Stratum 1 covers up the Lower Stratum, Stratum 2 covers up Stratum 1, Stratum 3 covers up Stratum 2, and Stratum 4 covers up Stratum 3. Strata 5-8 are unused.

How to enable all 8 Strata

  • Usually 4 Strata are enough for your map but if you feel you really need more you can enable Strata 5-8.
    • Click on Lighting layer and change Terrain Shader to TTerrainXP
Resources window.png

Let’s begin texturing by making the base texture a nice dirt. Select the Lower Stratum layer in the Layers window. Make sure the Resources window is open by checking Resources in the View menu. The Resource Browser should look like the this.

We are interested in the Stratum tab. Select the Desert tileset in the Tileset dropdown. Drag the picture of des_gravel01_albedo.dds from the Resource Browser onto the Albedo picture of the Strata Properties window. You should see a noticeable change in the look of your map. Next drag the picture of des_gravel_normal.dds from the Resource Browser onto the Normal picture in the Strata Properties window. If you are zoomed in closely enough you will see a second change.

Next go through and pick some textures you like for Strata 1-4. The normal part of a stratum is not required, but will improve a stratum’s look by imitating small variations in height. You can adjust the repeat rate of strata across the ground with the scrollbars in the Strata Properties window. The official maps tend to use relatively high repeat rates (low values in the number box). The normal textures are designed to have the same repeat as the color texture, although there is no particular reason they can’t be different. Many of the official maps use mismatching repeats to great effect.

  • You can open already done maps and copy their theme by simply selecting same strata.

Now comes the fun part: the actual painting! With a stratum selected (1, 2, 3, or 4), click the brush button Brush icon.PNG on the top toolbar or press B. This interface should look familiar. Go nuts and paint the left half of your terrain into a work of art. Keep in mind what natural formations look like. For example, cliff faces will typically be rougher surfaces, and flat areas will be covered in grass. Don’t feel bad if it takes you a long time to get it right. This can be the most time consuming part of map creation.


If you like the symmetry of the terrain, you can use Photoshop to mirror each stratum. Click on the Export Mask button in the Strata Properties Properties icon.PNG for each stratum. Save each to a .raw file with a distinct name and rotate them in Photoshop as you did for the heightmap. Then go through and reload them with Import Mask.

  • Important: The terrain texture masks are half the size of your map. For a 256x256 map such as Summer Duel, they will be saved as a 128x128, 8- bit texture. Make sure these settings are correct when you load the masks into Photoshop.

On the right is the new and reborn Summer Duel.

What a difference textures make! Note that unless you have a superhuman power for creating perfectly symmetrical images freehand, there will be a seam down the middle of your map. Minor touchups should correct the problem. Textures don’t impact gameplay, so absolutely perfect symmetry is not required.

Unfortunately, there was an unforeseen problem. Notice the tan strip along the bottom and right of the map. These portions of the map will only be covered by the Lower Stratum, so plan your map carefully if this bothers you. Later on we will see a nice trick (defining an AREA) to hide the ugly truth and make the strips invisible.

Placing resources and props

Placing resources

Snap to grid.png

Now that the map is technically playable and has some visual appeal, it’s time to place some resources. A little care must be taken to ensure that the mass locations are fairly distributed. A commander should be able to build the four first mass extractors in the same amount of time from both sides of the map. If mass deposits are close enough to allow doubleadjacency, the same adjacency bonuses should be available to both sides. Mass deposits farther away should be the same distance from the starting location. For reference, a factory is 9 grid units wide and tall; power generators are 2.25 wide and tall. The commander build range is 10.

  • How to make symmetric mass points.
    • Markers can't be rotated or copy pasted, that's why we're going to use props to get mirrored positions.
  1. Place resources on one half of the map
  2. Place some props on same position (rocks for example)
  3. Select them all, either click and drag, or click on them all while having pressed SHIFT
  4. Go to Prop Edit window (picture below)
  5. Check Rotare about map center box, set 180 Yaw and click on Set button
  6. Place resource markers on the other side of map and then don'd forget to delete props under them!

Placing resources is short and easy. Go back to the Markers layer in the Layer window. Drag a Mass marker and position it. Repeat for every mass deposit you want on the map. Hydrocarbon locations can be placed with the Hydrocarbon marker.

  • To make all your resource markers line up correctly with the build grid, select "Autosnap to o-grid" in the options menu before placing them.
  • You need to "shake" mass and hydro markers a bit on map to align correctly in grid.

See, easy! Here is a fully functional, enjoyable Summer Duel.

Here is an important note for future reference. The in-game preview for the map as it currently is will show the markers on it, just as they appear above. To get rid of them, check the Hide All Markers box in the Markers layer. Always save the map file with this box checked before you release your map to the public. That way the preview image will be clean.

Placing props

Props resources window.png

Every official map contains various props that add a great deal of flair to a map. These include trees and rocks that can be reclaimed for resources. This part is a little tedious, but it will be worth it in the long run.

  • For placing props, uncheck Autosnap to o-grid in Options menu.

Go to the Props layer in the Layer window. Next, click on the Props tab in the Resource Browser window. Select the Evergreen tileset in the Tileset dropdown and the trees category from the Category dropdown. Go ahead and drag one of the pictures onto your map. You should see appear, along with a blue circle. It looks like this:


The pink sections allow you to manipulate the prop. Clicking on the E and dragging up and down will allow you to change the prop’s elevation. Clicking on the arrow allows you to rotate the prop. The S is used for resizing other items, but is unused for props. You can move the prop by clicking on it and dragging. Alternatively, holding R on the keyboard will allow you to rotate the prop without clicking; holding M on the keyboard will allow you to move the prop without clicking.

If we had to place each tree individually, we’d be stuck for days at this stage. Fortunately there is a way to place more than one at a time. Pick some trees you like and drag them into the Active props for automatic placement section of the Prop Edit window. You should see something like this:

Prop edit.png

We are going to create a sort of “prop brush” defined by the settings here. What the three sliders do is self-explanatory. Slope falloff angles controls what types of slope your props will be placed on. Setting both Start and End to 0 will require the props to exist on perfectly flat terrain. A range of 0 to 20 is good for getting up close to cliffs without actually placing anything on a cliff. Once you are satisfied with your settings, click the Enable automatic placement mode checkbox.

Moving the mouse over the map will display a circle defining your brush. Clicking will place props at the rate you set in Props to place per second. The actual rate may be lower because this is the number of props the editor attempts to place a second. If Min distance between props is set to a high number, the editor will not be able to fit them all within the brush. If you want to remove something from the brush, select it from the list and click the delete button Delete icon.png. If you placed some props you didn’t mean to, you can either undo (Ctrl + Z) or uncheck the automatic placement mode box, drag a selection around the misplaced props, and press Delete on your keyboard.

Go through and place trees and rocks on the left-hand side of your map. To make them symmetrical, press Ctrl + A to select all props on the map. Press Ctrl + C followed by Ctrl + V to duplicate every prop. Without deselecting anything, check the Rotate about map center box. Type 180 into the Yaw box and click Set. Feel free to do this with multiple sets of props to give as natural a feel as possible. Here is Summer Duel with its new props:


Adding decals

The difference in visual quality between Low and High fidelity is staggering. Most of the difference is due to decals. Decals are individual textures placed onto the terrain. They can take different forms. Some are placed as images on the map, like the explosion scar from the initial commander warp. Other decals act as normal maps on the ground to give the appearance of roughness. Some of the official GPG maps contain hundreds of decals. If you are serious about your map, this part can be just as time consuming as the heightmap and textures—decal placement makes the difference between a pretty map and a gorgeous map.

Go to the Decals layer in the Layer window. Click on the Decals tab in the Resource Browser window. To add a decal, simply drag it from the Resource Browser window onto the map. The controls to manipulate decals work the same as for props. Holding S on your keyboard will allow you to resize the decal without clicking. Elevation controls are not available for decals. You can create symmetrical decals in the same way as you did props. To get to the Map centered rotation checkbox, click on the arrow at the top toolbar Arrow icon.png.

If you drag a few decals and zoom around, you’ll notice that some of them fade out much too quickly. You can adjust this in the Decal Properties Properties icon.PNG window. In the LOD Cutoff box, type in a higher number and click Set. You can also give a decal a minimum viewable distance with the Near LOD Cutoff box. Be very careful with these cutoffs. You want them high enough to be visible at normal zoom levels, but performance will be poor if you have a thousand decals with a cutoff of 10,000. With appropriate cutoffs there’s no excuse to hold back on decals, so make your map look as beautiful as possible!

Have no fear if a decal gets buried under others and you can’t select it again. Holding down Ctrl while you click will allow you to cycle through multiple decals on top of each other. You can reorder the decal you have selected with the arrow buttons in the Decal Properties Properties icon.PNG window (Scrool down). If you want to always see your decals in the editor, go to View > Force Decals.


The editor gives you full control of the world lighting Supreme Commander uses. To adjust the settings, go to the Lighting layer in the Layers window. The best way to get the hang of the settings is to experiment. You can create everything from a bright midday noon to a spooky dusk, so have fun! Note that you can scroll down the Lighting menu to get access to even more options.

Defining gameplay areas

Area properties.png

Remember those ugly tan strips along the edges of our map before? We want to get rid of them now, this is pretty easy. It works by defining a gameplay area - everything outside this area will not be displayed. Here's how it works.

Go to the Areas layer in the Layer window. Click on the New button New map icon.PNG to create an area entitled AREA_1. Click on the text under the Value column and change it to “1, 1, 255, 255”. The end result should look like this.

Areas are always visible when you have the Areas layer selected. To view them with other layers, go to View > Debug > Areas.

Now we need to edit our map script and add a command to activate the play area. Open your MapName_script.lua file and edit to something like this:

local ScenarioUtils = import('/lua/sim/ScenarioUtilities.lua')
local ScenarioFramework = import('/lua/ScenarioFramework.lua')
   function OnPopulate()
       ScenarioFramework.SetPlayableArea('AREA_1' , false)

Shot explanation: The first two lines allow you to make use of other .lua files in your code. The function OnPopulate is called by the game engine when it is time to add entities to the map. The first line within this function tells the scenario to initialize the armies if they are not already done so by default. The second function sets the playable area of the map to the area we defined earlier. If you’ve played the campaign, this is essentially the same code used to expand the playing field after certain checkpoints. Save the file and go back to the editor. Go to Edit > Scenario and ensure that the Script path matches the file you created. Fix it if it does not.

Adding civilians

If you want to add Civilians to your map, go back to the Armies layer in the Layer window. Create two new armies. Click on one and rename it to ARMY_9. Rename the other to NEUTRAL_CIVILIAN. In the Armies window, click on the [+] of NEUTRAL_CIVILIAN to open up the army list. With INITIAL selected, right click on the map and choose a building. This will plop down a building at the location you clicked for the NEUTRAL_CIVILIAN army. If you accidentally deselect the INITIAL group, you can always drag buildings between groups in the Armies window. Place all of the typical civilian buildings in the NEUTRAL_CIVILIAN army. Defensive structures should be placed in the INITIAL group of the ARMY_9 army.

Next we have to tell the game to treat these as civilian buildings. Unfortunately, doing this from the editor causes a crash, so we have to do it manually. Close the editor and go to the MapName_scenario.lua file. Modify the CustomProps section so that it looks like this:

   customprops = {
     ['ExtraArmies'] = STRING( 'ARMY_9 NEUTRAL_CIVILIAN' ),

Save the lua file and try out the map. If you have problems getting the civilians to appear, make sure you set up the armies properly. If all else fails, open up one of the official maps that contains civilians and compare the setup to yours.

  • Color of civilians can be changed by modifying map script using RGB Color Codes.
    • Make sure you don't change color to some that is available for players. It would be confusing.

Example for white color:

function OnStart(self)


Wreckage is created in the same way as civilians. In ARMY_9, create a new group by clicking on the second new button from the left. Rename the group to “WRECKAGE” by clicking on it. Place units around the map with the WRECKAGE group selected. The units initially start alive, which is why they appear so in the editor, but a script automatically destroys them at the start of the game.

Last things to do

Before uploading your map in vault make sure everything is working. Launch your map in skirmish. Take a look at these things:

  • Auto-teams are working correctly
  • All player are spawned
  • All mexes and hydros can be built (+ storages around mexes)
  • There are no props on mexes and hydros.
  • Delete any map preview from map folder.
  • Map file names (before the extensions) are the same as the folder name or the vault will just say "no valid map datas" or something similar when you try to upload it.

New Map Version

'X' is your version number

  • Step 1: Change the folder from FOLDERNAME to FOLDERNAME.v000X
  • Step 2: Go to MAPNAME_scenario.lua
  • Step 3: Change the following...
   map = '/maps/FOLDERNAME/MAPNAME.scmap',
   save = '/maps/FOLDERNAME/MAPNAME_save.lua',
   script = '/maps/FOLDERNAME/MAPNAME_script.lua',


   map = '/maps/FOLDERNAME.v000X/MAPNAME.scmap',
   map_version = X,
   save = '/maps/FOLDERNAME.v000X/MAPNAME_save.lua',
   script = '/maps/FOLDERNAME.v000X/MAPNAME_script.lua',

If you were using custom textures, you have to show editor path to textures in newly renamed folder as well, otherwise you will end up with black screen.

Map version1.pngMap version2.png